Complete ring spinning 16.128 spinldes

we offer on sale, a complete spinning unit of 16.128 spindles.
Machinery is entirely of RIETER , from blowroom to ring spinning. The year of construction is 1999 & 2001 and the condition is excellent.
The ring spinning frames are Rieter model G33, linked with Murata 7V link coners. 

Stenter Bruckner

we offer subject to prior sale as under:
Re: ATS/140410
No. 1 stenter BRUCKNER, year 1994, w.w. 240 cms, 6 chambers, natural gas heated, Vertical chain with pins and clips, equipped with:
padder Bruckner for chemicals application, weftstraightener, selvedge decurlers Tandematic TU 4350 and sensors E&L FR1501, entry chain zone of 6 metres, Eclipse burners, selvedge gumming and triming devices, cooling zone at delivery side, Small roll winder, plaiter and big batcher at exit
Machine is still running

FOY / POY spin line Barmag

Re: LPS/130410
Nos. 2 FOY / POY spinning line BARMAG, year 1998, each line with following specs:
1 extruder / 2 spinning heads / 12 spinning positions / 6 ends per spinning position / 6 spin pack per spinning position / 12 quenching system / 1 spin-finish pump per position / 6 TCS tubes per position / 12 craft winders per machine
Max. production capacity of 1 extruder is 3400 kg/d.
Each extruder, type 9E10, is equipped with: 6 heating zones,temp. range 2500 – 3100C, Screen quenching chambers
Spinning heads equipped with spinning pumps and spin packs
12 spinning positions, each with 6 points
CPF central filter
Extruders equipped with “a hot tubes”, max. temp. 2000C., spin finish application jets and interlacing jets.
In each position a birotor CRAFT WINDER 6/900 is installed, max. spinning speed 5500 m/min.
The manufactured count range is 33 – 76 dtex.
Possibility to control individual positions.
Machines have hot tube but not hot godged roller.

Warping & Sizing unit

we avail subject to prior sale:
Re:STW/130410
No. 1 warping & sizing installation, consisting of:
No. 1 sizing machine ZELL, year 1994, max. w.w. 440 cms head, 18 drying cylinder, 2 tanks - tank width 280 cms, 2 PLV, back beam creel with 28 beam capacity, 54 beam, 2 extra upper roller, 1 extra down roller, 1 boiling tank with 1000 Kg capacity,2 drying tanks with 1000 Kg capacity
No. 1 warping machine BENNINGER, year 1984, w.w. 280 cms, 640 ends creel capacity, speed 0-1200 m/min.

Stenter BTM BABCOCK / ARTOS

we have an excellent like new condition stenter:

Re: PJF/140110-1
No.   1   stenter BTM BABCOCK / ARTOS, model 1028, year 2002, w.w. 240 cms, 4 chambers, oil heated, with foll. particulars:
Entry padder with 2 cylinders , make SUCKY
Bianco Centralizer
E&L at the entry
Selvedge gumming
Pins and Clips
Steaming chamber at the entry
Vertical chain return
1,5 mts. Cooling zone at the exit
Selvedge trimming
Bianco non stop at the exit
individual oil boiler
Photos & Price upon serious interest

Warning about used dyeing machines SCLAVOS

Are you offered used dyeing machine SCLAVOS by 3rd party?
Be carefull before accepting and confirming purchase. It is not only the model and year of construction that make the difference !!!
Give us the serial no. and we can get for you the exact machine profile.

Make sure about the peripherals included: 
- how many chemical addition tanks (1 or 2)
- the controller type (Sedomat 3500, 5000, 5500 or other)
- with or without: Salt addition unit, pH TDS unit, SHR heat recovery unit 
- Beware: capacity per port on ATHENA is 250Kgs, on VENUS 180 Kgs 

We have been recently receiving complains from several of our contacts that there is one offer currently circulating in market, placed by UK dealer, about 1 SCLAVOS ATHENA machine, 2 port, year 2004 and 1 SCLAVOS VENUS machine, 3 port, year 2000, at a cheap price compared to our company offers.
After consulting with M/s SCLAVOS files, we were able to locate and found out that the specific machines offered by other party have the following specifications:
VENUS MACHINE: HT 540 KGS cap., Controller SEDOMAT 3500, 1 Chemical add tank (only !!!), NO Salt Addition System
ATHENA MACHINE: Technology: ATHENA, Controller: SEDOMAT 5000, 2 chemical add tanks,NO Salt dosing, NO pH TDS control, NO SHR heat recovery
ON THE CONTRARY OUR OFFERED MACHINES SPECIFICATIONS, FOR AN EASY COMPARISON:
VENUS MACHINE:HT 540 KGS cap., Controller SEDOMAT 3500, 2 chemicals addition tanks, WITH Salt Addition System
ATHENA MACHINE: HT 500 KGS cap., Vessel constructed 2004 – in year 2007 everything was replaced by new Technology: ATHENA2, Controller: SEDOMAT 5500, 2 chemical add tanks, Dry Salt Logistics type DSL500F, year 2007 - pH-TDS Unit type pH-Tds M+R, year 2007, pH Automatic Control (pHAC), year 2007 - Heat Recovery System (SHR)
This machine is fully optioned by Sclavos with all available extras and peripherals
HENCE OUR MACHINE IS ATHENA2 FULLY EQUIPPED, WHEREAS THE OTHER ONE IS ATHENA BASIC EXECUTION.
For those who are really concerned and know about SCLAVOS machines, they can understand the difference, else why not contacting SCLAVOS for getting an offer for addition of all missing peripherals ?

This is just for putting things back to order