immediate sale of:
Re: LWP/290710
No. 1 flat printing machine REGGIANI, year 2006, w.w. 280 cms, 6 colors, 46 mts printing blanket, 3 drying sections, gas heated, included color preparation (not paste), condition excellent, attractive price
20 December 2010
17 December 2010
continuous bleaching range BENNINGER
Re:LTF/161210 continuous bleaching range BENNINGER
No. 1 openwidth bleaching range BENNINGER, model AP-DL075T3E-LG EXTRACTA 1800, year 2002, w.w. 1800 mm, for woven fabric, 100% Co, in weight range 130-450 gsm, Speed 8-80 m/min, with:
1 cloth feeding with squeezing mangle traction unit and cloth accumulator for one single layer
1 closed washing compartment for single cloth guiding, type LG E7, with 21 m cloth content
1 closed washing compartment for double cloth guiding, type LG DA6, with 28 m cloth content
1 pneumatic high efficiency squeezer for a linear pressure of max. 500 N/cm
1 impregnation unit type IMPACTA
1 chemical dosing installation
1 combnation pre-treatment steamer type DL075T3E, for reaction time of 5-30 min
1 steam conditioning and rate control unit for steamer
1 intensive washing compartment, type FORTRACTA, for single cloth guiding, 5 m cloth content
1 closed washing compartment for double cloth guiding, type LG DA6 C, with 30 m cloth content
1 closed washing compartment for double cloth guiding, type LG DA6, with 28 m cloth content
1 closed washing compartment BECOFLEX, type LG DA6 / 2, for double cloth guiding, 14 and 14 m cloth content
1 pnematic high efficiency squeezer for a linear pressure of 500 N/cm
1 cloth delivery for one single layer with batching device for max. batch dia.of 2000 mm, plaiting device and cloth accumulator for non-stop run
1 A.C. multi motor drive with digital drive control and process management with LCD-Display
Tele service system, type TELE-LINK
Foundation supports, stainless steel
1 automatic acid dosing unit
1 heat exchanger, type TW 16, throughput max.16 m3/h
No. 1 openwidth bleaching range BENNINGER, model AP-DL075T3E-LG EXTRACTA 1800, year 2002, w.w. 1800 mm, for woven fabric, 100% Co, in weight range 130-450 gsm, Speed 8-80 m/min, with:
1 cloth feeding with squeezing mangle traction unit and cloth accumulator for one single layer
1 closed washing compartment for single cloth guiding, type LG E7, with 21 m cloth content
1 closed washing compartment for double cloth guiding, type LG DA6, with 28 m cloth content
1 pneumatic high efficiency squeezer for a linear pressure of max. 500 N/cm
1 impregnation unit type IMPACTA
1 chemical dosing installation
1 combnation pre-treatment steamer type DL075T3E, for reaction time of 5-30 min
1 steam conditioning and rate control unit for steamer
1 intensive washing compartment, type FORTRACTA, for single cloth guiding, 5 m cloth content
1 closed washing compartment for double cloth guiding, type LG DA6 C, with 30 m cloth content
1 closed washing compartment for double cloth guiding, type LG DA6, with 28 m cloth content
1 closed washing compartment BECOFLEX, type LG DA6 / 2, for double cloth guiding, 14 and 14 m cloth content
1 pnematic high efficiency squeezer for a linear pressure of 500 N/cm
1 cloth delivery for one single layer with batching device for max. batch dia.of 2000 mm, plaiting device and cloth accumulator for non-stop run
1 A.C. multi motor drive with digital drive control and process management with LCD-Display
Tele service system, type TELE-LINK
Foundation supports, stainless steel
1 automatic acid dosing unit
1 heat exchanger, type TW 16, throughput max.16 m3/h
Projectile looms STB 250
we offer the following lot of STB looms:
Re: BGW/151210
Nos. 100 Projectile looms STB-2-250, year 1986-92, w.w. 250 cms (100”), 2 color with Cam motion for 10 levers, each loom with:
1 weft accumulator
L,R and central tuck-in
4 heald frames
4 dropper bars
2 split beams flange dia. 800 mm.
1 cloth roller
Condition: stopped on mill floor but fully installed.
Re: BGW/151210
Nos. 100 Projectile looms STB-2-250, year 1986-92, w.w. 250 cms (100”), 2 color with Cam motion for 10 levers, each loom with:
1 weft accumulator
L,R and central tuck-in
4 heald frames
4 dropper bars
2 split beams flange dia. 800 mm.
1 cloth roller
Condition: stopped on mill floor but fully installed.
20 November 2010
Contract for supply of machinery
Our company entered into agreement with customer from Asia to supply complete line of machines for dyeing & finishing of knitted fabrics, aswell as with mill owners for purchasing this equipment.
The lot consists of 24 dyeing machines SCLAVOS, MCS & SCHOLL, of total batch load capacity approx. 9.000 Kgs. Also included all rest equipment for padding, hydroextraction, drying, calendering, compacting, stentering, plus finishing section for raising, brushing, shearing, pol-rotor and aixiliary machines.
Dismantling planned to start by first week of December 2010 and loading will be ended within January 2011.
It is estimated that we will need about 25 40ft containers for shipment, among which 7-8 will be special equipment (Flatracks) for movement of the dyeing machines.
The lot consists of 24 dyeing machines SCLAVOS, MCS & SCHOLL, of total batch load capacity approx. 9.000 Kgs. Also included all rest equipment for padding, hydroextraction, drying, calendering, compacting, stentering, plus finishing section for raising, brushing, shearing, pol-rotor and aixiliary machines.
Dismantling planned to start by first week of December 2010 and loading will be ended within January 2011.
It is estimated that we will need about 25 40ft containers for shipment, among which 7-8 will be special equipment (Flatracks) for movement of the dyeing machines.
15 July 2010
Fabric raising, shearing & emerizing machine lot
We offer on sale the following department for dry finish of fabrics:
Re:AMD/120410-2
No. 1 raising machine especially for fleece fabrics COMET, year 1992, w.w. 240 cms, single drum, 36 rollers, 3 counterpile – 1 pile (peach effect)
No. 1 raising machine for knits LAFER, mod. GRI-90 DUPLEX, year 2001, w.w. 240 cms, 2 drums of 24 rollers each (total 48 rollers), 1 counterpile – 1 pile
No. 1 raising machine for knits LAFER, mod. GRV-90 DUPLEX, year 1999, w.w. 240 cms, 2 drums of 24 rollers each (total 48 rollers), 1 counterpile – 1 pile
No. 1 raising machine LAFER, model GRI-90 H2400, year 1997, width 240 cms, for knitted and woven fabrics, with 2 drums each of with 24 raising cylinders, upper drum on counterpile - lower drum on pile-counterpile, PLC control, touch screen, machine complete with suction filters
No. 1 shearing machine MARIO CROSTA, totally refurbished by RAMATEX IT year 2000, w.w. 220 cms
No. 1 POL-ROTOR HERGETH, year 1975, typ. PRS210GF, w.w. 220 cms
No. 1 emery machine T.W. RILEY (ROCHDALE), year 1982, w.w. 220 cms, 5 rollers, oscillating movement of rollers
No. 1 shearing machine for terry MORTAMET, year 1982, w.w. 240 cms
No. 1 shearing machine MORTAMET, year 1987, w.w. 240cms
10 June 2010
Dyeing – finishing mill for knits in tubular and openwidth form
Mill details overwiew:
Re: KPD/090610 Complete dyeing – finishing of knits in tubular and openwidth form
-Total capacity of dyeing machines per batch: 2.500 kgs fabric
-Total dyeing capacity per day – assuming 3.5 batches average per day – 9.000 kgs fabric
-Dyeing machines Sclavos atmospheric & HT, from 50 Kgs to 540 Kgs batch load
-Relax dryers RUCKH & ALEA
-Tubular compacting FERRARO
-Years of construction: 1991 – 2003
-Condition excellent, presently working
Re: KPD/090610 Complete dyeing – finishing of knits in tubular and openwidth form
-Total capacity of dyeing machines per batch: 2.500 kgs fabric
-Total dyeing capacity per day – assuming 3.5 batches average per day – 9.000 kgs fabric
-Dyeing machines Sclavos atmospheric & HT, from 50 Kgs to 540 Kgs batch load
-Relax dryers RUCKH & ALEA
-Tubular compacting FERRARO
-Years of construction: 1991 – 2003
-Condition excellent, presently working
12 May 2010
Complete ring spinning 16.128 spinldes
we offer on sale, a complete spinning unit of 16.128 spindles.
Machinery is entirely of RIETER , from blowroom to ring spinning. The year of construction is 1999 & 2001 and the condition is excellent.
The ring spinning frames are Rieter model G33, linked with Murata 7V link coners.
Machinery is entirely of RIETER , from blowroom to ring spinning. The year of construction is 1999 & 2001 and the condition is excellent.
The ring spinning frames are Rieter model G33, linked with Murata 7V link coners.
14 April 2010
Stenter Bruckner
we offer subject to prior sale as under:
Re: ATS/140410
No. 1 stenter BRUCKNER, year 1994, w.w. 240 cms, 6 chambers, natural gas heated, Vertical chain with pins and clips, equipped with:
padder Bruckner for chemicals application, weftstraightener, selvedge decurlers Tandematic TU 4350 and sensors E&L FR1501, entry chain zone of 6 metres, Eclipse burners, selvedge gumming and triming devices, cooling zone at delivery side, Small roll winder, plaiter and big batcher at exit
Machine is still running
13 April 2010
FOY / POY spin line Barmag
Re: LPS/130410
Nos. 2 FOY / POY spinning line BARMAG, year 1998, each line with following specs:
1 extruder / 2 spinning heads / 12 spinning positions / 6 ends per spinning position / 6 spin pack per spinning position / 12 quenching system / 1 spin-finish pump per position / 6 TCS tubes per position / 12 craft winders per machine
Max. production capacity of 1 extruder is 3400 kg/d.
Each extruder, type 9E10, is equipped with: 6 heating zones,temp. range 2500 – 3100C, Screen quenching chambers
Spinning heads equipped with spinning pumps and spin packs
12 spinning positions, each with 6 points
CPF central filter
Extruders equipped with “a hot tubes”, max. temp. 2000C., spin finish application jets and interlacing jets.
In each position a birotor CRAFT WINDER 6/900 is installed, max. spinning speed 5500 m/min.
The manufactured count range is 33 – 76 dtex.
Possibility to control individual positions.
Machines have hot tube but not hot godged roller.
Nos. 2 FOY / POY spinning line BARMAG, year 1998, each line with following specs:
1 extruder / 2 spinning heads / 12 spinning positions / 6 ends per spinning position / 6 spin pack per spinning position / 12 quenching system / 1 spin-finish pump per position / 6 TCS tubes per position / 12 craft winders per machine
Max. production capacity of 1 extruder is 3400 kg/d.
Each extruder, type 9E10, is equipped with: 6 heating zones,temp. range 2500 – 3100C, Screen quenching chambers
Spinning heads equipped with spinning pumps and spin packs
12 spinning positions, each with 6 points
CPF central filter
Extruders equipped with “a hot tubes”, max. temp. 2000C., spin finish application jets and interlacing jets.
In each position a birotor CRAFT WINDER 6/900 is installed, max. spinning speed 5500 m/min.
The manufactured count range is 33 – 76 dtex.
Possibility to control individual positions.
Machines have hot tube but not hot godged roller.
Warping & Sizing unit
we avail subject to prior sale:
Re:STW/130410
No. 1 warping & sizing installation, consisting of:
No. 1 sizing machine ZELL, year 1994, max. w.w. 440 cms head, 18 drying cylinder, 2 tanks - tank width 280 cms, 2 PLV, back beam creel with 28 beam capacity, 54 beam, 2 extra upper roller, 1 extra down roller, 1 boiling tank with 1000 Kg capacity,2 drying tanks with 1000 Kg capacity
No. 1 warping machine BENNINGER, year 1984, w.w. 280 cms, 640 ends creel capacity, speed 0-1200 m/min.
Re:STW/130410
No. 1 warping & sizing installation, consisting of:
No. 1 sizing machine ZELL, year 1994, max. w.w. 440 cms head, 18 drying cylinder, 2 tanks - tank width 280 cms, 2 PLV, back beam creel with 28 beam capacity, 54 beam, 2 extra upper roller, 1 extra down roller, 1 boiling tank with 1000 Kg capacity,2 drying tanks with 1000 Kg capacity
No. 1 warping machine BENNINGER, year 1984, w.w. 280 cms, 640 ends creel capacity, speed 0-1200 m/min.
03 March 2010
Stenter BTM BABCOCK / ARTOS
we have an excellent like new condition stenter:
Re: PJF/140110-1
No. 1 stenter BTM BABCOCK / ARTOS, model 1028, year 2002, w.w. 240 cms, 4 chambers, oil heated, with foll. particulars:
Entry padder with 2 cylinders , make SUCKY
Bianco Centralizer
E&L at the entry
Selvedge gumming
Pins and Clips
Steaming chamber at the entry
Vertical chain return
1,5 mts. Cooling zone at the exit
Selvedge trimming
Bianco non stop at the exit
individual oil boiler
Photos & Price upon serious interest
Re: PJF/140110-1
No. 1 stenter BTM BABCOCK / ARTOS, model 1028, year 2002, w.w. 240 cms, 4 chambers, oil heated, with foll. particulars:
Entry padder with 2 cylinders , make SUCKY
Bianco Centralizer
E&L at the entry
Selvedge gumming
Pins and Clips
Steaming chamber at the entry
Vertical chain return
1,5 mts. Cooling zone at the exit
Selvedge trimming
Bianco non stop at the exit
individual oil boiler
Photos & Price upon serious interest
10 February 2010
Warning about used dyeing machines SCLAVOS
Are you offered used dyeing machine SCLAVOS by 3rd party?
Be carefull before accepting and confirming purchase. It is not only the model and year of construction that make the difference !!!
Give us the serial no. and we can get for you the exact machine profile.
Be carefull before accepting and confirming purchase. It is not only the model and year of construction that make the difference !!!
Give us the serial no. and we can get for you the exact machine profile.
Make sure about the peripherals included:
- how many chemical addition tanks (1 or 2)
- the controller type (Sedomat 3500, 5000, 5500 or other)
- with or without: Salt addition unit, pH TDS unit, SHR heat recovery unit
- Beware: capacity per port on ATHENA is 250Kgs, on VENUS 180 Kgs
- how many chemical addition tanks (1 or 2)
- the controller type (Sedomat 3500, 5000, 5500 or other)
- with or without: Salt addition unit, pH TDS unit, SHR heat recovery unit
- Beware: capacity per port on ATHENA is 250Kgs, on VENUS 180 Kgs
We have been recently receiving complains from several of our contacts that there is one offer currently circulating in market, placed by UK dealer, about 1 SCLAVOS ATHENA machine, 2 port, year 2004 and 1 SCLAVOS VENUS machine, 3 port, year 2000, at a cheap price compared to our company offers.
After consulting with M/s SCLAVOS files, we were able to locate and found out that the specific machines offered by other party have the following specifications:
VENUS MACHINE: HT 540 KGS cap., Controller SEDOMAT 3500, 1 Chemical add tank (only !!!), NO Salt Addition System
ATHENA MACHINE: Technology: ATHENA, Controller: SEDOMAT 5000, 2 chemical add tanks,NO Salt dosing, NO pH TDS control, NO SHR heat recovery
ON THE CONTRARY OUR OFFERED MACHINES SPECIFICATIONS, FOR AN EASY COMPARISON:
VENUS MACHINE:HT 540 KGS cap., Controller SEDOMAT 3500, 2 chemicals addition tanks, WITH Salt Addition System
ATHENA MACHINE: HT 500 KGS cap., Vessel constructed 2004 – in year 2007 everything was replaced by new Technology: ATHENA2, Controller: SEDOMAT 5500, 2 chemical add tanks, Dry Salt Logistics type DSL500F, year 2007 - pH-TDS Unit type pH-Tds M+R, year 2007, pH Automatic Control (pHAC), year 2007 - Heat Recovery System (SHR)
This machine is fully optioned by Sclavos with all available extras and peripherals
HENCE OUR MACHINE IS ATHENA2 FULLY EQUIPPED, WHEREAS THE OTHER ONE IS ATHENA BASIC EXECUTION.
For those who are really concerned and know about SCLAVOS machines, they can understand the difference, else why not contacting SCLAVOS for getting an offer for addition of all missing peripherals ?
This is just for putting things back to order
Subscribe to:
Posts (Atom)